Quest Controls, Inc. is the source for your Electronic Monitoring, Control and Test Solutions engineered for the Telecommunications Industries, Outside Plant and Central Office Applications.

TELSEC^® 800

for Monitoring, Control & Network Surveillance of Cabinets

Installs in remote cabinets and customer prem sites: both new construction and legacy equipment.
Performs all controlling, monitoring, and communication functions in a single product.
Provides critical visibility to the remote site through 2-way communications.
Enables remote interrogation of temperature, float voltage, other analog sensors, and alarm and point logs from any alarm and/or maintenance center.
Provides intelligent alarming for easier alarm interpretation, dispatch, and consistency across multiple sites, and avoids redundant alarms for the same problem.
Compact, versatile package operates with a standard control program or can be
customized to meet your requirements.
Delivers critical battery monitoring information during discharge: predicted battery capacity and time remaining until low voltage disconnect.

Acting as your smart eyes and ears at the remote site, the TELSEC^® delivers large savings and quick payback by:

Reducing visits to remote cabinet sites from false or non-descriptive alarms, or changing
access codes/keys.
Eliminating downtime by acting as an early warning system.
Reducing capital expenditures by combining alarming and access control functions.
Extending the life of critical operating equipment including batteries and telephony equipment.

Battery monitoring: predicts battery capacity and time remaining during discharge using Telcordia Algorithm.
Alarms transported by 2-way communications via choice of modem, Ethernet, or RS232 connections, or 1-way via contact closures.
TCP/IP over Ethernet Connectivity.
Caller ID support ensures secure connection.
Card access control with 3500 cards per system.
Intrusion alarming.
Local backlit LCD display presents active alarms and analog values.
Built-in craft port supports local serial communications.
Supports alarm phone numbers for calls to PCs, pagers, and printers.
5 password levels, up to 50 passwords.
Non-volatile Flash memory prevents program loss and stores program upgrades sent remotely.
Mount in 19" or 23" rack or on cabinet door.
Web browser for status and configuration.

Specifications

TELSEC® 800

Part Number

150679; for SNMP/WEB browser option, order part number: 150769

Mounting

Rack mount 19" or 23", or on cabinet door

Inputs

8 universal inputs: analog (0-5 VDC or 0-20 mA), dry contact closure or wet contact (3-75 VDC)

Outputs

8 Normally Open (NO), 1 amp at 30 VDC, 0.3 amps at 60 VDC, 0.5 amps at 125 VAC

Card Access

Supports industry standard Wiegand format, proximity or swipe card readers. Up to 3500 cards can be programmed per site. Logs 500 most recent events

Power

±18 to 65 VDC, 0.5 amps. Optional 110 VAC/220 VAC, 60 Hz, 0.5 amp

Modem (with Caller ID)

56K modem with Caller ID. Up to 24 phone numbers can be programmed to limit access to the system.
Note: Caller ID service must be present on the phone line

Serial Port

One asynchronous db9 RS232 serial port. Programmable for speed, parity, and bit format

Network Interface (option)

LAN

Protocols Supported

Dial-up PPP

Ethernet 10BaseT with RJ45 connector

TCP/IP, Telnet, HTTP, SMTP, SNMP v1, v2c, Traps/Informs

Provides TCP/IP connectivity over PPP via analog modem for the TELSEC® and three additional RS232 asynchronous ports for connecting external devices that require remote connectivity over the PPP interface

Logging

Logs all inputs, outputs, and alarms, up to 10,000 points

Software

Supports any off-the-shelf terminal communication software (e.g. Procomm®, HyperTerminal®) or Web browser (e.g. Internet Explorer® 6+, Firefox® 1.5+)

I/O Terminals

A single 50-pin Amphenol® connector for outputs, discrete and analog inputs. Supports 2 wire (tip and ring), connections for each point using 25 pair cable

Battery

Long-life lithium. 10-year shelf, 1.5 years under load

Temp Sensor Accuracy

±1°F (±0.5°C), temp sensor s

Ambient Operating Temp

-40 to 180°F (-40 to 82°C), 0-95% RH Non-condensing

Certification

NEBS Level III Approved, UL Listed, CE

Dimensions

1.75" H x 13.25" W x 9.5" D (45 mm x 337 mm x 241 mm)

Shipping Weight

4 lbs (1.81 kg)

Warranty

3 Years

Specifications subject to change without notice

DOWNLOAD BROCHURE

HOME