Quest Controls, Inc. is the source for your Electronic Monitoring, Control and Test Solutions engineered for the Telecommunications Industries, Outside Plant and Central Office Applications.

TELSEC^® 1500/2000 RM/WM

for Monitoring, Control and Network Surveillance of Remote Sites

The TELSEC® 1500/2000 RM/WM Controller provides an integrated surveillance solution to monitor and control all environmental and access control functions and equipment alarming in the remote site:

Performs all controlling, monitoring, and communication functions in a single product.
Install in Remote Sites: CEVs, Huts, CECs, CUEs, WICs, Manholes, Cabinets, and Customer Prem sites.
Install in Central Offices, Cable Vaults, Switching Centers, and Head-Ends.
Delivers critical battery monitoring during discharge: predicted battery capacity and time remaining until low voltage disconnect is calculated constantly. The TELSEC® will generate an alarm when the capacity or time remaining is below user programmable thresholds.
Compact, versatile package operates with a standard control program or can be customized to meet your requirements.
Enables remote interrogation of remote sites from any alarm and/or maintenance center.
NEBS Level III Approved, UL Listed, and CE.

Acting as your smart eyes and ears at the remote site, the TELSEC® delivers large savings and quick payback by:

Reducing energy costs via intelligent HVAC lead/lag control strategies.
Reducing visits to remote sites.
Eliminating downtime by acting as an early warning system.
Reducing capital expenditures by replacing multiple devices to accomplish the same task.
Extending life of critical operating equipment including air conditioners and batteries.

TELSEC® 1500/2000 RM/WM Features:

TCP/IP over Ethernet Connectivity.
Supports SNMP v1, SNMP v2c.
Caller ID support ensures secure connection.
Battery monitoring: predicts battery capacity and time remaining during discharge using Telcordia Algorithm.
Monitors individual battery voltage and string voltage.
Intelligent lead/lag control of multiple A/C Units.
Variable speed control of up to 6 heat exchanger fans when used with the TELSEC® 500 or Fan Control Module.
Monitors all environmental alarms: temperature, humidity, fire/smoke, toxic and combustible gas, high water, halon discharge.
Card access control of up to 4 doors with 3500 cards per
system plus Intrusion Monitoring.
Built-in craft port supports local serial communications.
Supports alarm phone numbers for calls to PCs, pagers, and printers.
5 password levels, up to 50 passwords.
Non-volatile FLASH memory prevents program loss and stores program upgrades.

Specifications

TELSEC® 1500RM

TELSEC® 2000RM

TELSEC® 1500WM

TELSEC® 2000WM

Part Number

150619

150618

150617

150612

Mounting

Rack mount 19" or 23"

Wall mount

Number of Universal Inputs

Number of Outputs

8 NO

16 NO

8 NO

16 NO

Input Types

All universal inputs can be analog (0-5 VDC or 0-20mA), dry contact closure or wet contact (3-75 VDC)

Output Types

Normally Open (NO), 1 amp at 30 VDC, 0.3 amps at 60 VDC, 0.5 amps at 125 VAC

Card Access

Supports industry standard Wiegand format, proximity or card swipe readers. Up to 4 doors can be controlled.
Control 4 doors with 3500 cards. Logs 500 most recent events

Power

±18 to 65 VDC, 0.5 amps. Optional 120/110 VAC, 60Hz, 0.25 amps

Front Panel

Built-in programming panel with 8 keys and a 32-character backlit LCD Display

Modem (with Caller ID)

56K modem with Caller ID. Up to 24 phone numbers can be programmed to limit access to the system.
Note: Caller ID service must be present on the phone line

Serial Port

One asynchronous db9 RS232 serial port. Programmable for speed, parity, and bit format

Network Interface (option)

LAN

Protocols Supported

Dial-up PPP

56K DSU

Ethernet 10BaseT with RJ45 connector

TCP/IP, Telnet, HTTP, SMTP, SNMP v1, v2c, Traps/Informs

Provides TCP/IP connectivity over PPP via analog modem for the TELSEC® and three additional RS232 asynchronous ports for connecting external devices that require remote connectivity over the PPP interface

Logging

Logs all inputs, outputs, and alarms, up to 10,000 points

Software

Supports any off-the-shelf terminal communication software (e.g. Procomm®, HyperTerminal®) or Web browser (e.g. Internet Explorer® 6+, Firefox® 1.5+)

I/O Terminals

Two (2) 50 PIN Amphenol connectors for outputs, discrete and analog inputs.
Supports 2 wire (tip & ring), connections for each point using 25 pair cable

Battery

Long-life lithium. 10-year shelf, 1.5 years under load

Temp/Humidity
Sensor Accuracy

Temp: ±1°F (±-0.5°C), Humidity: ±2% of range. Temperature & Humidity sensors included

Ambient Operating Temp

-40 to 180°F (-40 to 82°C), 0-95% RH Non-condensing

Certification

NEBS Level III Approved, UL Listed, CE

Dimensions

1.75"H x 17"W x 10.5"D (45mmH x 432mmW x 267mmD)

11"H x 11"W x 2" D (279mmH x 279mmW x 51mmD)

Shipping Weight

6 lbs. (2.7kg)

4 lbs. (1.8kg)

Warranty

1 Year

To increase the system configuration to an additional 32 Inputs and 16 Outputs, a rack mount expansion module (TELSEC® RME, Part# 150640) and wall mount expansion module (TELSEC® WME, Part# 150724) can be networked to the TELSEC® RM/WM.

Specifications subject to change without notice

DOWNLOAD BROCHURE

TELSEC® RM (rack mountable)

TELSEC® WM (wall mountable)

HOME