 |
GSM Gas Monitors:
Carbon Monoxide, Methane, & Hydrogen
Individual Gas Monitors for Vaults & RT’s
[ Download 2 Page Brochure (128KB) ] |
Monitors Toxic or Combustible Gases
Stays Calibrated up to 5 Years without Drift
Field Adjustable Alarm Thresholds
Alarms for Gas Thresholds & Sensor Fault
Calibrates On-Site without Replacement
Visual LED Alarm Status |
|
|
Quest’s GSM Gas Monitors are designed to provide safe, reliable, and long life monitoring and alarming for toxic
and combustible gases for your underground vaults, CEVs, CEMHs, CUEs, CECs, and WICs. |
• Monitors Carbon Monoxide (CO), Methane (HC), or Hydrogen (H2) Gases.
• Microprocessor-based design enables gas monitors to stay in calibration up to 5 years; then can be calibrated on-site without replacing monitor.
• Provides separate relays for exceeding pre-set gas thresholds and sensor failure.
• Alarm thresholds adjustable 0 to 90% in the field via RS232 port.
• Powered by –48VDC ensures gases are being monitored during commercial AC power failure.
• Connect directly to the TELSEC® controllers. |
|
 |
Key Features
• LED indicators exhibit power, alarm and sensor fault status.
• Automatic reset when gas levels fall below alarm thresholds.
• Communicate via RS232 port using standard, off-the-shelf
terminal emulation software, such as Procomm® or Hyperterminal®. |
|
Specifications
|
|
Sensor Description
|
Carbon Monoxide
(Toxic)
|
Methane
(Combustible) |
Hydrogen
(Combustible) |
Model#
|
GSM-CO |
GSM-HC |
GSM-H2 |
Part#
|
300151 |
300149 |
300148 |
| PID/SSI# |
001537000 |
N/A |
001537018 |
| Material ID# |
828371 |
N/A |
828372 |
| Detection Range |
0 to 250ppm |
0 to 10,000ppm |
0 to 500ppm |
Pre-set Alarm Level
|
50ppm |
5,000ppm |
200ppm |
Outputs
Relay Contact Rating
K1
K2
|
0.6 Amps at 125VAC or 2.0 Amps at 30VDC (resistive)
SPDT, Form C, normally de-energized for alarm
SPDT, Form C, normally energized for sensor fault
|
Accuracy
|
±5% FS (Full Scale) |
RS232 Port
|
db9: On-site calibration, retrieval of gas values, and adjustment of threshold alarms
|
Connections
|
12”(305mm) wiring harness interfaces power and alarm relay
|
| Power |
10 to 60 VDC or 10 to 42 VAC, 3 Va
|
Electrical Compliance
|
Meets CSA standards (ENTELA Certifcation)
|
Ambient Operating Temp
|
0 to 110ºF (-18 to 43ºC) |
32 to 110ºF (0 to 43ºC) |
32 to 110ºF (0 to 43ºC) |
Dimensions
|
5.5”(140mm) W X 5.5”(140mm) H X 4.5”(114mm) D |
Weight
|
1.8 lbs (0.8kg)
|
Warranty
|
1 year |
| Specifications are subject to change without notice |
|
Send mail to info@questcontrols.com with questions or comments about this web site.
Copyright©1999-2008 Quest Controls, Inc. Updated: 03.10.08
|
|
|
