Now With Modbus Support!
Serial Modbus monitoring converts Modbus data to SNMP over Ethernet
Serial Modbus monitoring converts Modbus data to SNMP over Ethernet
for Monitoring Cabinets & Small Sites
- Applications: Telecommunication/Cable –
Remote Cabinets & Shelters - Data/Switching/Computer center
Alarm Monitoring
The TELSEC MINI™ PLUS is a low cost surveillance solution to monitor environmental conditions, DC power and other alarm contacts in a remote cabinet or small shelter. The TELSEC MINI™ PLUS has six universal inputs for monitoring temperature, digital contacts or any 0-5 VDC or 4-20 mA sensors and a serial port to monitor Modbus enabled devices for trending and alarming. Acting as a master, the Mini PLUS can poll up to 128 unique Modbus registers. There are two digital outputs for alarm notification as well as an Ethernet port for remote communications.
The system features a built-in Web Server for programming and status monitoring of the site including a historical graphing engine. The alarm logic is programmable with multiple severity levels and stored in non-volatile memory. All alarms can be sent using SNMP traps and/or E-mail notification.
Features
- 6 Universal Inputs & 2 Digital Output
- Monitors Float Voltage through Power Connection
- SNMP, Embedded Web Server & E-mail Alarm Messaging
- Serial Modbus monitoring converts Modbus data to SNMP over Ethernet
- Compact Package allows for Wall or Rack Mount
- Enables Interrogation of Remote Site from any Alarm or Maintenance Center
- Operates with a Standard Control Program or can be customized to meet your requirements
Benefits
- Simple to install & program
- Real time view of System Status
- Reduces visits to Remote Sites
- Low Cost Solution
- Eliminates downtime by acting as an Early Warning System
Specifications
Part number: 150975
Inputs: 6 universal inputs, 0-5VDC, 0-20 MA, thermistor and contact closure
Outputs-Digital: 2 form C outputs. Contact Rating: .5amp @ 60VDC
Power: 18-65VDC
Serial Interface: RS485 programmable for baud rate and data format for polling of Modbus enabled devices. Supports 16 bit & 32 bit signed integers and floating point registers.
Network interface: Ethernet 10 Base-T RJ45 connector, built-in web server, HTTP, SMTP, SNMP, v1, v2 Traps Informs, TFTP, NTP
Logging: Logs all inputs and alarms.
I/O terminal: Screw Terminals supports up to 12 AWG
Battery: Long Life Lithium
Temp sensor accuracy: Temp ±1 F
Alarm notifications methods: e-mail, SNMP Traps
Destinations: 4 programmable trap destinations, 4 e-mail groups (each having 5 e-mail addresses)
Ambient operating Temp: -20 to 180 F (-29 to 82 C), 0-95 % Non-condensing
Dimensions: 3.625 W x 8.125 L x 1 H in. (92 x 206 x 25 mm)
Weight: 0.5 lb (227 g)
Warranty: 1 Year
Specifications subject to change without notice
